more progress today, i cut the trailing arm bracket off, this has been the hardest part so far. but it would definatly be easier if the car was higher off the ground in my garage. what you have to do is remove a portion of the frame rail in order to fit the AWD forward sub-frame mount. i used a grinder, cutting wheel, and a sawzall<sp. the first pic is of the stock trailing arm bracket. this is a picture i modified from barefoot on 3si, because i forgot to take a picture of mine before i started cutting. the next is the end result after cutting, third is of the AWD mount in place. and the last is a little diagram i made and printed out of the Z16A framerail (so i a had a general idea of where to cut)
it's really starting to come along!
